Iqua Headphones BHS 601 User Manual

The style of communicating  
Bluetooth Wireless Headset  
BHS - 601  
 
About Bluetooth™ Technology  
Bluetooth is a technology for wireless communication between devices.  
Bluetooth technology is based on a radio with a receiver and a transmitter, which have been built  
into a tiny microchip. One of these microchips is incorporated in the Wireless Headset, and  
another is integrated into the compatible mobile phone.  
Bluetooth offers the ability to create wireless connections between the headset and mobile phone  
within a radius of up to 10 meters, without a physical cable or line-of-sight connection.  
 
Bluetooth Wireless Headset BHS-601 User Guide  
Getting to Know Your Bluetooth Headset  
Charging socket  
Dual Color LED  
Microphone  
Figure 1.  
First time use  
Charge your headset  
Pair your headset with a Bluetooth enabled mobile phone  
 
Charging your headset:  
AC Charger  
USB Charger Cable  
DC Car Charger  
Figure 2.  
The Bluetooth Headset comes with a built-in rechargeable battery. Before using this  
headset, please fully charge the battery for the first time use.  
 
Charging Options:  
1. Plug AC Charger to power supply end of USB Cable, then plug mini USB connector end  
of the USB Cable to charge jack of the headset.  
2. Plug DC Car Charger to power supply end of USB Cable, then plug mini USB connector  
end of the USB Cable to charge jack of the headset.  
3. Plug the USB Cable to the USB Connector of a PC, then plug mini USB connector end of  
the USB Cable to charge jack of the headset.  
Normal Charging Time  
Under normal usage, battery of headset will be full after 2 hours of charging. When battery is full,  
headset will stop charging power automatically.  
Charge Indication  
When headset is charged, LED is red color constantly on. Once battery is full, LED turns off  
automatically.  
Talk & Standby Time  
If battery is charged fully and under normal usage conditions, talk time is up to 5 hours / standby  
time 120 hours.  
 
Low Battery  
When the headset is on and the battery becomes low, the LED will blink red color and the  
headset will "beep" 3 times every 20 seconds. At that time, please recharge the battery as  
described in the above step as "Charging Your Headset".  
Turn on the Headset  
Constantly press  
color for 3 times.  
Button for 5 seconds until you hear 2 short beeps. The LED will blink blue  
Button for 2 seconds until you hear 2 short beeps. The LED will blink red  
Turn off the Headset  
Constantly press  
color for 3 times.  
Pairing Your Headset  
This headset must use a Bluetooth enabled mobile phone. Configuration set up as below  
for the first time use.  
Keep headset and phone around 1 meter.  
Assure headset is turned off.  
Constantly press  
Button until LED blinks red and blue in turn.  
Initiate Bluetooth function of phone & search for Bluetooth devices.  
Phone will start searching for Bluetooth devices. If it's successful, phone screen will show the  
name of obtained device - "BHS-601". Press "Yes" to pair this headset to the phone.  
Input ID code of headset - "0000". Press "Yes" to complete pairing. Meanwhile, this headset  
is under Standby -mode - BLUE LED blinks 5 times.  
Back to main menu of phone. Headset is under Standby -mode and ready for Bluetooth  
communication. Please locate this headset within 10 meters (max.) to phone.  
Notice: If pairing process cannot complete within 2 minutes, LED will stop blinking red and  
blue in turn. Please follow up above steps to repairing again.  
 
Link headset with phone  
Once pairing is successful, headset is under Standby -mode. Please refer to procedure  
below.  
For incoming and outgoing calls, phone will link headset automatically. User can talk to  
microphone of this headset for voice dialing or redial out the last phone number.  
For incoming and outgoing calls, phone will link headset automatically. If phone has been cut  
off link to headset, reconnect procedure as below.  
1. Press  
Button. Headset will be reconnected to phone and press "yes" on the phone  
to accept reconnect mode.  
2. Operate phone menu to Bluetooth function and then into program of paired device and  
select "BHS-601".  
When headset is under Standby -mode but cannot pick up/dial out call, please follow up  
procedure as below for reconnect.  
1. Press  
Button. Headset will be reconnected to phone and press "yes" on the phone  
to accept reconnect mode.  
2. Operate phone menu to Bluetooth function and then into program of paired device and  
select "BHS-601".  
 
To Use Headset  
To Dial a Call  
When there is an active connection between the headset and the phone. Dial the number  
normally on the phone.  
To Answer a Call  
When there is an incoming call, a ringing tone will come out of this headset. Press shortly  
Button or the  
Button to answer a call.  
To Reject an Incoming Call  
When there is an incoming call, ringing tone will come out of this headset. Press  
3 seconds to reject a call.  
Button for  
To End a Call  
During an active call, press  
Button for 3 seconds to end call.  
Switch between Headset and Phone  
During an active call, press the  
Phone –mode. Shortly press either  
Headset –mode.  
Button for 3 seconds to switch from Headset –mode to  
Button or Button to switch from Phone –mode to  
 
Mute  
During an active call, press both buttons at the same time. Headset will beep. Press any one of  
the buttons to disable mute.  
Voice Activation  
Under Standby -mode, press  
Button or  
Button for 1 second to activate Bluetooth  
connection. User will hear a beep and then headset is available to use voice activation function.  
Notice:  
1. Before using voice activation, please assure that phone supports this function. (Voice  
activation is subject to phones built-in with voice activation function and refers to voice  
dialing procedure of individual phone.)  
Last Number Redial  
Under Standby –mode, press  
phone call.  
Button for 3 seconds, headset will dial out the last dialed  
 
Volume Adjustment  
During a call, press  
reduce volume.  
Button for 1 second to add volume, press  
Button for 1 second to  
To Reset the Headset  
You may want to reset the headset to original setting. This also clears all current pairings.  
1. Assure the headset is OFF.  
2. Constantly press the  
than 30 seconds).  
Button until LED blinks red and blue color in turn (press more  
3. Release the  
Button.  
4. Constantly press the  
Button again until you hear 2 beeps.  
5. Connect the headset to the charger for a few seconds.  
6. The headset will turn off and return to the original setting mode. All the previous pairing  
data will be cleared.  
 
Warning  
Headset  
Please turn off this headset before putting it into your pocket or bag. If it is not turned off and  
Button is pressed accidentally, this headset may dial out with unknown.  
Do not expose the headset under liquid, moisture or humidity as it is not waterproof.  
Do not use abrasive cleaning solvents to clean the headset.  
Do not expose the headset under high or low temperatures.  
Do not expose your headset to contact with sharpness objects as this will cause scratches  
and damage.  
Do not stick anything on inside of the headset as this may damage internal components.  
Do not attempt to disassemble the headset as it does not contain serviceable components.  
Built-In Battery  
Do not attempt to replace the headset's battery by yourself as it is built-in and is not  
changeable.  
Only use the charger supplied of the manufacturer when charging the headset.  
Do not disassemble the charger as it may expose you to dangerous voltages or other risks.  
Incorrect reassembly can cause electric shock when the headset is subsequently used.  
Do not use the charger outdoors or under humid environment.  
Avoid charging the headset in extremely high or low temperatures.  
 
Product Specifications  
Bluetooth Specification:  
Bluetooth Profile Supported:  
Rang of Frequency:  
Dimensions:  
Nominal Charging Time:  
Talk Time:  
Version 1.1  
Headset and Handsfree Profiles  
2.4GHz Spectrum  
66mm (L) x 21mm (W) x 11mm (H)  
Within 2 hours  
Up to 5 hours  
Standby Time:  
Up to 120 hours  
Because operation of Bluetooth is dependent on individual phone, please refer to phone manual.  
 
12 MONTH LIMITED WARRANTY  
IQUA Ltd. warrants that this product is free from material and workmanship defects for a period of  
12 months from date of purchase provided the following terms of this warranty are satisfied. The  
warrant applies to the original owner of this product, only.  
1. The purchaser must be able to proof the purchase by presenting original sales receipt  
describing the product to establish the validity of the warranty claim to IQUA Ltd. at the  
provider of warranty service. IQUA Ltd. shall have the right to deny warranty without  
dated proof-of-purchase. Any evidence of alteration, erasure, or forgery results in  
termination of the right of warranty.  
2. IQUA Ltd. agrees to repair or replace without charge to the original owner any defective  
product under warranty.  
3. IQUA Ltd. will supply replacement parts free of charge for any IQUA product under  
warranty upon request. Replacement or repair do not extend original warranty period.  
4. This warranty is not valid for product owners who attempt to repair defective units.  
5. Under Certain product liability regulations may apply to you as the owner of the Product,  
however under no circumstances is IQUA Ltd. liable for any indirect or consequential  
damages to person or property by the use of any IQUA products.  
6. The warranty is not valid in case of fire, lighting, earthquake, accident, misuse, unusual  
physical or electrical stress or any other cause beyond normal usage and care of the  
product.  
7. IQUA Ltd. reserves the right to make changes or improvements in design or manufacture  
without having any obligation to install such changes in existing and sold products.  
8. Warranty does not cover normal wear and tear of the product or the operation time of the  
battery.  
 

Jacuzzi Hot Tub EG90 User Manual
JAMO Stereo Amplifier AT101 User Manual
Jenn Air Dishwasher JDB8910 User Manual
Jensen Car Video System MZ7TFT User Manual
Jura Capresso Coffeemaker IMPRESSA C5 User Manual
JVC Digital Camera GR DV1 User Manual
JVC DVD Player XV N50BK User Manual
Karcher Pressure Washer K 256M User Manual
Kenwood Coffeemaker CM700 User Manual
KitchenAid Ice Maker KUIS185DBL0 User Manual