JL Audio Car Speaker SB T 4RNR 10W User Manual

S B -T-4 R N R /1 0 W Ø S t e a lt h b o x ™  
F it s 1 9 9 6 - 1 9 9 9 To y o t a 4 R u n n e r  
In s t a lla t io n G u id e :  
This Stealthbox is a product which requires professional installation skills and tools. Please read this  
installation guide thoroughly before beginning the project. It will guide you step by step through the  
installation. Several of the steps in this process may require two people to accomplish.  
It is absolutely vital that the enclosure be properly mounted to the vehicle according to these instruc-  
tions. Failure to mount the enclosure properly presents two problems: 1 ) The sub-bass performance  
will suffer due to the movement of the enclosure caused by the force exerted by the woofer and 2 ) A  
loose enclosure presents a serious safety hazard in the event of a collision or sudden deceleration.  
STEP 1 : Remove the door from the storage pocket on the  
passenger side of the cargo area.  
STEP 2 : Place the supplied 4 " x 4 " wax square, sticky side  
down, on the wheelwell in the vicinty of the threaded insert in  
the Stealthbox as shown at right.  
S h e e t S K U # 0 1 1 1 3 7 R e v is io n 8 /8 /0 0  
S B -T-4 R N R /1 0 W Ø , J L A U D IO , In c 1 9 9 9  
P a g e  
1
 
Threaded Insert  
Molded into  
Enclosure  
Enclosure Wall (fiberglass)  
STEP 1 1 : W hile one person adjusts the position  
of the Stealthbox from inside the vehicle, a second  
person should bolt the Stealthbox into place using  
the supplied hardware. Before tightening the bolt  
apply a bead of silicone sealant between the two  
flat fender washers and the vehicle's floor pan.  
Then tighten the bolts fully. See diagram at right:  
Flat Washer  
Car's Sheet Metal  
Bead of Silicone Sealant  
Split Lock Washer  
3/8" Bolt  
IMPORTANT!!!  
Once the bolts are tightened, spray undercoating onto the bolt heads to prevent rust, leaks and  
loosening of the bolts over time. Failure to do so may result in severe corrosion and may present a  
serious safety hazard.  
This completes the ins tallation.  
Specifications :  
Supplied Hardware:  
Enclos ure Type: Acoustic Suspension (Sealed)  
Driver Type: J L AUDIO 1 0 W Ø-4 Subwoofer  
Cont. Power Handling: 1 2 5 Watts  
Nominal Impedance: 4  
(1 ) 4 " X 4 " wax square  
(1 ) 3 / 8 " X 1 1 / 4 " Bolt  
(2 ) 3 / 8 " X 1 1 / 4 " Fender Washers  
(1 ) Split Lock Washer  
P.O. Box 8 3 9 0 0 4 , Miramar, Florida 3 3 0 8 3 -9 0 0 4 Voice: (9 5 4 ) 9 8 1 -9 4 9 7 Fax: (9 5 4 ) 9 8 7 -7 8 5 5  
S h e e t S K U # 0 1 1 1 3 7 R e v is io n 8 /8 /0 0  
S B -T-4 R N R /1 0 W Ø , J L A U D IO , In c 1 9 9 9  
P a g e  
3
 
 

Ingersoll Rand Impact Driver 231HA User Manual
Intel Computer Hardware 249323 003 User Manual
J A Henckels Swimming Pool 8300i User Manual
Kawai Drums R 50e User Manual
Kenmore Gas Grill 1191623 User Manual
Kenwood Marine Radio KCA RC50MR User Manual
Kenwood Marine Radio TS 130SE User Manual
Kidde Smoke Alarm 820 1356 User Manual
KitchenAid Ice Maker KSBP25FK User Manual
Kramer Electronics Webcam FC 15 User Manual