Kodak Printer Accessories E 2411 User Manual

February 2003 E-2411  
TECHNICAL DATA / COLOR PAPER  
KODAK EKTACHROME  
RADIANCE III HC Copy Paper  
SIZES AVAILABLE  
Sizes and catalog numbers may differ from country to  
country. See your dealer who supplies KODAK  
PROFESSIONAL Products. The following sizes are  
available in the U.S. and Canada.  
—NOTICE—  
Discontinuance of  
KODAK PROFESSIONAL EKTACHROME  
RADIANCE III Papers and Materials and  
KODAK EKTACHROME R-3 Chemicals  
Alternative options for image capture and output have  
gradually eliminated the need for PROFESSIONAL  
EKTACHROME RADIANCE III Papers and Materials as well  
as chemicals for Process R-3. Therefore, dependent on  
individual country and market requirements, Kodak will  
discontinue these products as inventories are exhausted  
Sheets  
Size  
in. x in. /  
cm x cm  
Sheets Per  
Surface  
CAT No.  
Package  
100  
50  
8.5 x 11 /  
21.6 x 27.9  
N
F
508 6673  
508 6756  
508 6699  
508 6707  
508 6715  
508 6657  
Technology has made the option of scanning, manipulating,  
and outputting images directly to traditional color paper very  
popular, and photographers are increasingly using color  
negative film and digital cameras for image capture. Producing  
positive prints, even from transparencies, for image display no  
longer requires the use of RADIANCE Papers and Materials.  
11 x 14 /  
27.9 x 35.6  
11 x 14 /  
27.9 x 35.6  
50  
N
N
F
16 x 20 /  
40.6 x 50.8  
50  
Information on Kodak Professional Modular Digital Workflow  
Products (Equipment and Software) is available at  
20 x 24 /  
50.8 x 61  
50  
Thank you for using KODAK PROFESSIONAL Products.  
20 x 24 /  
50.8 x 61  
50  
N
Use this resin-coated color reversal paper to make direct  
color copies when you need high-contrast reproduction of  
line-copy originals such as drawings, maps, documents,  
blueprints, and layouts. EKTACHROME RADIANCE III  
HC Copy Paper has higher contrast and D-max than  
KODAK EKTACHROME RADIANCE III Copy Paper.  
The “HC” stands for high contrast.  
This paper is available in both rolls and sheets with F  
(glossy) and N (semi-matt) surfaces. You can process it with  
KODAK EKTACHROME R-3 Chemicals.  
Rolls  
Rolls  
in. x ft /  
cm x m  
Spec No.  
Surface  
CAT No.  
11 x 200 /  
27.9 x 61  
193  
193  
193  
193  
223  
223  
223  
223  
223  
224  
224  
F
N
N
F
508 6897  
508 6830  
508 6764  
508 6848  
508 6822  
508 6855  
521 1461  
508 7036  
508 6814  
508 6871  
508 6806  
11 x 200 /  
27.9 x 61  
11.7 x 200 /  
29.7 x 61  
FEATURES  
BENEFITS  
11.7 x 200 /  
29.7 x 61  
• Improved color reproduction • More accurate colors  
• Extremely low minimum  
density  
• Cleaner, whiter whites  
20 x 200 /  
50.8 x 61  
N
F
• Elimination of thermal  
yellowing  
• Longer print life under  
dark-storage conditions  
24 x 200 /  
61 x 61  
30 x 100 /  
76.2 x 30.5  
N
F
50 x 100 /  
127 x 30.5  
50 x 100 /  
127 x 30.5  
N
F
50 x 100 /  
127 x 30.5  
50 x 100 /  
127 x 30.5  
N
©Eastman Kodak Company, 1999  
 
PROCESSING  
VIEWING  
Use KODAK EKTACHROME R-3 or R-3 LU Chemicals to  
process this paper in continuous or roller-transport  
processors. For specific processing instructions, see  
KODAK Publication No. Z-129B, Using KODAK  
EKTACHROME R-3 Chemicals in Continuous and  
Roller-Transport Processors, available on our website at  
Evaluate prints under light of the same color and brightness  
that you will use to view the final prints. A good average  
viewing condition is a light source with a color temperature  
of 4000 ±1000 K, a Color Rendering Index (CRI) of 85 to  
100, and an illuminance of a least 538 lux (50 footcandles).  
Fluorescent lamps such as the cool white deluxe fluorescent  
lamp (made by several manufacturers) meet these  
conditions. You can also use a mixture of incandescent and  
fluorescent lamps. For each pair of 40-watt cool white deluxe  
fluorescent lamps, use a 75-watt frosted tungsen bulb.  
DRYING  
Do not ferrotype this paper.  
Remove excess water from the surface of the paper before  
drying. Dry the prints using dust-free air. The temperature of  
the air will depend on the design of the dryer, the air-flow  
rate, and the total drying time. The ideal drying temperature  
is between 50 and 70°C (122 and 158°F). If the temperature  
is too high, the paper may curl. If the temperature is too low,  
the surface gloss of the paper is reduced, and the risk of the  
paper sticking is increased.  
MOUNTING  
From: cpotter@node1 (Chris Potter)  
You can mount prints with KODAK Dry Mounting Tissue,  
To: dpenazek@caps  
Type 2. The temperature across the heating platen of the  
mounting press should be between 82 and 99°C (180 and  
210°F). Temperatures above 110°C (230°F) or high pressure  
may cause physical and color changes in prints. Preheat the  
cover sheet that you use over the face of the print to remove  
moisture. Apply pressure for 30 seconds or longer for a thick  
mount.  
From cpotter@node1 Thu Dec 12 17:18:27 1996  
Date: Thu, 12 Dec 96 17:21:57 EST  
Subject: Illustration Update  
inns:  
any  
DISPLAYING  
Photographic dyes, like all dyes, can change with time and  
exposure to sunlight, ultraviolet radiation, excessive heat,  
and high humidity. To help prevent changes in photographic  
dyes, follow these guidelines:  
Illuminate prints with tungsten light whenever possible.  
Display prints in the lowest light level consistent with  
your viewing needs.  
If a print is exposed to direct or indirect sunlight or  
fluorescent light, use an ultraviolet-absorbing filter  
between the light source and the print.  
Keep the temperature and humidity as low as possible.  
KODAK EKTACHROME RADIANCE III HC Copy Paper E-2411  
3
 
CURVES  
Spectral-Dye-Density Curves  
Characteristic Curves  
2.5  
2.0  
4.0  
1/2 second  
Process: R-3  
Densitometry: Status A, Reflection  
Exposure:  
Process: R-3  
3.0  
2.0  
1.0  
1.5  
1.0  
B
G
Yellow  
Cyan  
R
Magenta  
0.5  
0.0  
0.0  
400  
F002_0779AC  
500  
600  
700  
0.0  
F002_0777AC  
1.0  
2.0  
3.0  
4.0  
WAVELENGTH (nm)  
LOG EXPOSURE (lux-seconds)  
Spectral-Sensitivity Curves  
2.0  
1.0  
0.0  
1.0  
2.0  
Magenta-  
Forming  
Layer  
Yellow-  
Forming  
Layer  
Cyan-  
Forming  
Layer  
250 300 350 400 450 500 550 600 650 700 750  
WAVELENGTH (nm)  
*Sensitivity = reciprocal of exposure (erg/cm2 ) required  
to produce specified density  
F002_0778AC  
NOTICE: The sensitometric curves and data in this publication represent product tested  
under the conditions of exposure and processing specified. They are representative of  
production coatings, and therefore do not apply directly to a particular box or roll of  
photographic material. They do not represent standards or specifications that must be met  
by Eastman Kodak Company. The company reserves the right to change and improve  
product characteristics at any time.  
4
KODAK EKTACHROME RADIANCE III HC Copy Paper E-2411  
 
MORE INFORMATION  
Kodak has many publications to assist you with information  
on Kodak products, equipment, and materials.  
The following publications are available from dealers who  
sell Kodak products, or you can contact Kodak in your  
country for more information.  
For the latest version of technical support publications for  
KODAK PROFESSIONAL Products, visit Kodak on-line at:  
If you have questions about KODAK PROFESSIONAL  
Products, call Kodak.  
In the U.S.A.:  
E-30  
Storage and Care of KODAK Photographic  
Materials—Before and After Processing  
1-800-242-2424, Ext. 19, MondayFriday  
9 a.m.7 p.m. (Eastern time)  
In Canada:  
E-1766  
E-1767  
KODAK EKTACHROME RADIANCE III Paper  
KODAK EKTACHROME RADIANCE III SELECT  
Material  
1-800-465-6325, MondayFriday  
8 a.m.5 p.m. (Eastern time)  
E-67  
E-70  
Finishing Prints on KODAK Water-Resistant Papers  
Retouching Prints on KODAK EKTACOLOR and  
EKTACHROME Papers  
Note: The Kodak materials described in this publication for  
use with KODAK EKTACHROME RADIANCE III HC Copy  
Paper are available from dealers who supply KODAK  
PROFESSIONAL Products. You can use other materials, but  
you may not obtain similar results.  
E-2410  
KODAK EKTACHROME RADIANCE III Copy Paper  
E-2412A KODAK EKTACHROME RADIANCE III Overhead  
Material  
E-2412B KODAK EKTACHROME RADIANCE III Clear  
Display Material  
E-2413  
Z-129  
KODAK EKTACHROME RADIANCE III Translucent  
Display Material  
Using KODAK EKTACHROME R-3 Chemicals,  
Sixth Edition  
Z-129A  
Z-129B  
Z-129C  
Z-129E  
KODAK EKTACHROME R-3 and R-3000  
Chemicals  
Using KODAK EKTACHROME R-3 Chemicals in  
Continuous and Roller-Transport Processors  
Using KODAK EKTACHROME R-3000 and  
R-3 Chemicals in Batch-Type Processors  
Monitoring and Troubleshooting Processes Using  
KODAK EKTACHROME R-3 and R-3000  
Chemicals  
Z-129G  
Z-129H  
Recovering Silver from Processes Using KODAK  
EKTACHROME R-3 Chemicals  
Using KODAK EKTACHROME R-3 LU Chemicals  
in Roller-Transport Processors  
KODAK EKTACHROME RADIANCE III HC Copy Paper E-2411  
5
 
KODAK EKTACHROME RADIANCE III HC Copy Paper  
KODAK EKTACHROME  
RADIANCE III HC Copy Paper  
KODAK Publication No. E-2411  
Kodak, Kodak Professional, Ektachrome, Ektacolor,  
Radiance, and Wratten are trademarks  
Minor Revision 2-03  
Printed in U.S.A.  
 

Indesit Cooktop KP 9507 EB User Manual
InFocus Projector C250 User Manual
Ingersoll Rand Septic System 6661AX X C User Manual
JL Audio Car Amplifier XD400 4 User Manual
JVC DVD Recorder DR M70SU User Manual
JVC Speaker System UX G300 User Manual
JVC Stove LP20878 001 User Manual
Kenmore Water System 6253888 User Manual
KitchenAid Power Hammer CMO 2743 User Manual
Korg Electronic Keyboard SP 170S User Manual