JL Audio 10W3v3 2 User Manual

10W3v3-2 / 10W3v3-4 / 10W3v3-8  
Subwoofers  
o w n e r ’ s m a n u a l  
Congratulations on your purchase of a JL Audio subwoofer component. Your JL Audio subwoofer is a  
precision loudspeaker which has been engineered to produce the highest quality sub-bass performance  
in your vehicle. Authorized JL Audio dealers have extensive technical information for many different  
applications of your new speaker. They also have the knowledge, skills and tools to build a high-quality  
enclosure that will maximize the performance of your speaker. We highly recommend that you have your  
enclosure built by an authorized JL Audio dealer.  
Inside you will find specifications and two recommended enclosures for your speaker; one is a sealed  
enclosure, the other is a ported design. Both types of enclosures will give you excellent sound quality and  
low-frequency extension. The sealed enclosure is a better choice if space is extremely tight, but the ported  
enclosure will produce 3dB more output at the same power if you have the extra space to work with.  
All specifications are subject to change without notice.  
SUBWOOFER  
10W3v3-2  
RECOMMENDED SEALED ENCLOSURES  
Volume  
(net int.)  
External Dimensions  
F3  
Fc  
(Hz)  
Qtc  
(Width x Height x Depth)  
(Hz)  
0.625 ft³  
17.7 litres  
18 in. x 11 in. x 9 in.  
457 mm x 279 mm x 229 mm  
48.3  
55.3  
0.831  
0.625 ft³  
17.7 litres  
18 in. x 11 in. x 9 in.  
457 mm x 279 mm x 229 mm  
10W3v3-4  
10W3v3-8  
46.9  
47.8  
52.9  
54.7  
0.818  
0.829  
0.625 ft³  
17.7 litres  
18 in. x 11 in. x 9 in.  
457 mm x 279 mm x 229 mm  
SUBWOOFER  
RECOMMENDED PORTED ENCLOSURES  
Volume  
Enclosure External Dimensions  
Slot Port Specs  
Rec. Slot Port Internal Dimensions Tune to:  
F3  
(net int.)  
(Width x Height x Depth)  
Slot Area x Slot Length  
Slot Width x Slot Height x Slot Length  
(Hz)  
(Hz)  
1.25 ft³  
35.4 litres  
23 in. x 12 in. x 12.125 in.  
584 mm x 305 mm x 308 mm  
13.125 sq. in. x 24.75 in.  
84.7 sq. cm. x 629 mm  
1.25 in. x 10.5 in. x 24.75 in.  
32 mm x 267 mm x 629 mm  
10W3v3-2  
10W3v3-4  
10W3v3-8  
32.0  
31.4  
31.7  
31.3  
1.125 ft³  
31.9 litres  
23 in. x 12 in. x 13.125 in.  
584 mm x 305 mm x 333 mm  
13.125 sq. in. x 24.75 in.  
84.7 sq. cm. x 629 mm  
1.25 in. x 10.5 in. x 28.625 in.  
32 mm x 267 mm x 727 mm  
31.8  
31.7  
1.25 ft³  
35.4 litres  
23 in. x 12 in. x 13.75 in.  
584 mm x 305 mm x 349 mm  
13.125 sq. in. x 24.75 in.  
84.7 sq. cm. x 629 mm  
1.25 in. x 10.5 in. x 25.5 in.  
32 mm x 267 mm x 648 mm  
The enclosure recommendations listed are external  
dimensions which assume the use of 3/4" (19mm)  
thick material. If you are using 5/8" (16mm) thick  
material, subtract 1/4" (6.5mm) from each dimension.  
Do not use any material with a thickness of less than  
5/8" (16mm) as this may compromise the rigidity of  
the enclosure.  
Allenclosurevolumeslistedarenetinternalvolumes!  
Box volume displacement, port displacement and  
brace displacement must be added to obtain the final  
gross internal volume. All enclosure dimensions listed  
have already taken this into account.  
“EL” (Port Extension Length)  
10W3v3-2: 11.125 in. (283 mm)  
10W3v3-4: 15.5 in. (394 mm)  
10W3v3-8: 11.75 in. (298 mm)  
10W3v3: 13.75 in. (349 mm)  
• When using two subwoofers in  
a
common  
enclosure simply double the required volume and,  
in the case of a ported enclosure, use two times the  
recommended port(s).  
Prolonged exposure to sound pressure levels in excess of 100dB can cause permanent hearing loss. This high-performance  
speaker can exceed this level. Please exercise restraint in its operation in order to preserve your ability to enjoy its fidelity.  
• We recommend the use of this speaker in a  
bi-amplified system using high-quality satellite speakers  
and amplifiers. We do not recommend the use of this  
subwoofer with a passive crossover (coil), as this type  
of device will adversely affect performance.  
When installing a subwoofer in your vehicle, it is extremely important to secure the enclosure firmly. We recommend  
bolting the enclosure through the metal of the floorpan or the frame of the vehicle with large diameter washers for  
reinforcement. If an enclosure is not firmly attached, it can become a projectile in a collision. This is particularly important  
in a hatchback, station wagon, sports utility vehicle, or van.  
JL AUDIO 10W3v3-2/10W3v3-4/10W3v3-8  
3
RECOMMENDED CONTINUOUS (RMS) POWER RANGE FOR ONE SUBWOOFER DRIVER:  
2 5 W  
7 5 W  
1 5 0 W  
3 0 0 W  
6 0 0 W  
1 0 0 0 W  
10W3v3  
L E G E N D :  
M I N I M U M  
O P T I M U M  
M A X I M U M  
WA R R A N T Y VO I D  
MEDIUM GRAY (MINIMUM):  
LIGHT GRAY (OPTIMUM):  
DARK GRAY (MAXIMUM):  
BLACK (WARRANTYVOID):  
From a reliability standpoint, this zone represents  
very comfortable operating power range for  
each driver. This level of power will not stress the  
woofer but will not extract all of its performance  
potential, either.  
Use of less than the minimum power level will  
not damage the woofer, but may result in  
unsatisfactory performance.  
This zone represents the best compromise  
between long-term reliability, high-output and  
low-distortion performance. This power level is  
lower than the woofer’s continuous power rating  
(as published in its specifications), but you will still  
be taking advantage of the woofer’s, low-distortion  
performance range without undue risk of failure.  
Slightly more SPL will be gained by pushing the  
power into this zone, but typically not more than  
2dB, compared to the light gray zone.The subwoofer  
driver is designed to operate safely up to this power  
range, but not beyond. Operate with caution.  
We do not recommend operating woofers at  
this level of power. In this zone, there is a very high  
probability that the driver will fail due to excessive  
heat and/or mechanical stress.  
Subwoofer drivers operated at these levels of  
power are NOT covered under warranty.  
a
JL Audio offers an extensive line of high-performance subwoofer drivers to fit a wide variety of enclosure and power applications.When designing systems with our drivers, it is very important to  
achieve a good power match between the subwoofer amplifier and the subwoofer driver's capabilities. The power levels listed in the above chart represent continuous (RMS) amplifier power per  
woofer and assume that the user will regularly make full use of that power without drastically overdriving the amplifier(s). Make sure you factor system impedance and the total number  
of subwoofers into your calculations.Adhering to these power recommendations will result in systems that are both reliable and enjoyable.  
JL AUDIO LIMITED WARRANTY (USA)  
Automotive Subwoofer Components  
JL AUDIO warrants this speaker to be free of defects in materials and  
workmanship for a period of one (1) year from the original date of purchase.  
Any applicable implied warranties are limited in duration to the period of the  
express warranty as provided herein beginning with the date of the original purchase  
at retail, and no warranties, whether express or implied, shall apply to this product  
thereafter. Some states do not allow limitations on implied warranties, therefore these  
exclusions may not apply to you. This warranty gives you specific legal rights, and you  
may also have other rights which vary from state to state.  
Damage caused by the following is not covered under warranty: accident, misuse,  
abuse, product modification or neglect, failure to follow installation instructions,  
unauthorized repair attempts, misrepresentations by the seller. This warranty does not  
cover incidental or consequential damages and does not cover the cost of removing  
or reinstalling the unit(s). Cosmetic damage due to accident or normal wear and tear  
is not covered under warranty.  
If you need service on your JL AUDIO product:  
This warranty is not transferable and applies only to the original  
purchaser of the product from an authorized JL AUDIO dealer.  
Warranty is voided if the factory-applied product serial number is  
removed or defaced.  
All warranty returns should be sent to JL AUDIO freight prepaid through an  
authorized JL AUDIO dealer and must be accompanied by proof of purchase (a  
copy of the original sales receipt.) Direct returns from consumers or non-authorized  
dealers will be refused unless specifically authorized by JL AUDIO with a valid  
return authorization number. Warranty expiration on products returned without  
proof of purchase will be determined from the manufacturing date code. Coverage  
may be invalidated as this date is previous to purchase date. Return only defective  
components. Non-defective items received will be returned freight-collect. Customer  
is responsible for shipping charges and insurance in sending the product to JL AUDIO.  
Freight damage on returns is not covered under warranty. Always include proof of  
purchase (sales receipt).  
Should service be necessary under this warranty for any reason due to  
manufacturing defect or malfunction, JL AUDIO will, at its discretion, repair or replace  
the defective product with new or remanufactured product at no charge.  
For Service Information in the U.S.A. please call:  
JL Audio customer service: (954) 443-1100 during normal business hours (Eastern Time)  
JL Audio, Inc  
10369 North Commerce Parkway, Miramar, FL 33025  
International Warranties:  
Products purchased outside the United States of America are covered only by that country’s distributor and not by JL Audio, Inc.  
Printed in USA  
JLA10W3v3_MAN_01_08_011201  

Bryan Boilers DR850 User Manual
Clarion DXZ838RMP User Manual
Extron electronic Extron Electronics Cable Box VSC 700D User Manual
Ikelite ZR900 User Manual
Infiniti Car Speaker 6 1 User Manual
Jensen Phase Linear BT1613 User Manual
JVC Camcorder GZ EX210 A User Manual
JVC GAMESCOPE GR SXM520 User Manual
JVC GET0701 001A User Manual
JVC GR AX640 User Manual